GE Appliances JGBS66DEKWW Owner's Manual download pdf (Page 18)

49-85214-5

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.

Control Panel and Knobs

Wipe the control panel after each use of the oven with

a damp cloth. For cleaning, use mild soap and water or

a 50/50 solution of vinegar and water. Rinse with clean

water. Polish dry with a soft cloth.

Do not use abrasive cleansers, strong liquid cleansers,

plastic scouring pads or oven cleaners on the control

panel—they will damage the finish.

Do not try to bend knobs by pulling them up or down or

by hanging a towel or other such loads. This can damage

the gas valve shaft.

The control knobs may be removed for easier cleaning.

With knobs in the OFF position pull them straight off the

stems.

The knobs can be washed by hand with soap and water

or in a dishwasher.

Not all knobs are interchangeable. To determine the

correct location of a particular knob, examine the back of

the knob. A knob with a label or two stem holes should

be replaced on the front panel first by matching the

shape of the knob holes to the shape of the control panel

stems. The remainder of the knobs having no labels and

only one stem hole can then be replaced on the front

panel anywhere there is a single stem.

Oven Exterior and Cooktop Surface

Do not use oven cleaners, abrasive cleansers, strong

liquid cleansers, steel wool, plastic scouring pads, or

cleaning powders on the interior or exterior of the oven.

Clean with a mild soap and water or a 50/50 solution of

vinegar and water. Rinse with clean water and dry with a

soft cloth. When cleaning surfaces, make sure that they

are at room temperature and not in direct sunlight.

If a stain on the door vent trim is persistent, use a mild

abrasive cleaner and a sponge-scrubber for best results.

Spillage of marinades, fruit juices, tomato sauces and

basting liquids containing acids may cause discoloration

and should be wiped up immediately. Let hot surfaces

cool, then clean and rinse.

Stem

Label

Stem

holes

Surface burner knob Knobs with two stem holes have

special locations

Cleaning The Oven

CARE AND CLEANING: Cleaning The Oven

Stainless Steel Surfaces (on some models)

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steel surface, use warm sudsy

water or a stainless steel cleaner or polish. Always wipe

the surface in the direction of the grain. Follow the cleaner

instructions for cleaning the stainless steel surface.

Cleaners with oxalic acid such as Bar Keepers Friend Soft

Cleanser™ will remove surface rust, tarnish and small

blemishes. Use only a liquid cleanser free of grit and rub in

the direction of the brush lines with a damp, soft sponge.

To inquire about purchasing cleaning products including

stainless steel appliance cleaner or polish, read the

Assistance/Accessories sections at the beginning of this

manual.

For easier cleaning, the control knobs may be removed

by pulling them directly outwards once the knobs are in

the OFF position. Do not pull knobs up or down or hang

objects on them. This can damage the gas valve shaft.

The knobs can be washed by hand with soap and water or

in a dishwasher.

To replace knobs after

cleaning, align the hole on

the knob backside with the

gas valve shaft and push

inward until the knob is

securely fastened.

Surface burner knob

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comments to this Manuals

No comments

GE Appliances JGBS66DEKWW Owner's Manual Page 18

Comments to this Manuals

Related products and manuals for Cookers GE Appliances JGBS66DEKWW